04-2012, rev. 0412 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 1 general purpose relays pcb relays n 5 to 10a rating n 1 form a (no) and 1 form c (co) contact arrangements n sensitive coil available for 1 form a type typical applications appliances, hvac, refrigerators, microwave ovens approvals vde 119568, ul e82292, cqc08001023449 technical data of approved types on request contact data contact arrangement 1 form a (no) rated voltage 30vdc, 277vac max. switching voltage 30vdc, 277vac rated current 5 to 10a contact material agsno 2 min. recommended contact load 100ma, 5vdc frequency of operation 360 ops./h operate/release time max. 10/5ms electrical endurance d type: 5a, 277vac resistive, -30c to +70c100x10 3 ops. l type: 5a, 277vac resistive, -30c to +70c 30x10 3 ops. d/l-wg type: 5a, 250vac resistive, -40c to +85c 100x10 3 ops. contact ratings type contact load cycles iec 61810 pch-..2m-wg a (no) 5a 250vac res, 85c 100x10 3 pch-..d2-wg a of c 5a 250vac res, 85c 100x10 3 pch-..d2m a (no) 5a 250vac res, 70c 100x10 3 pch-..l2m a (no) 5a 250vac res, 70c 30x10 3 pch-..d2 c (co) 5a/3a 250vac res, 40c 30x10 3 ul 508 pch a (no) 10a 125vac res, 85c 100x10 3 pch a (no) 5a 250vac general use, 85c 100x10 3 mechanical endurance, dc coil 10x10 6 operations coil data coil voltage range 3 to 48vdc operative range, iec 61810 2 coil insulation system according ul class f coil data (continued) coil versions, dc coil coil rated operate release coil rated coil code voltage voltage voltage resistance power vdc vdc vdc ?10 % mw sensitive type (for form a type only) 003 3 2.25 0.15 45 200 005 5 3.75 0.25 125 200 006 6 4.50 0.30 180 200 009 9 6.75 0.45 405 200 012 12 9.00 0.60 720 200 018 18 13.50 0.90 1620 200 024 24 18.00 1.20 2880 200 048 48 36.00 2.40 11520 200 all fgures are given for coil without pre-energization, at ambient temperature +23c. coil versions, dc coil coil rated operate release coil rated coil code voltage voltage voltage resistance power vdc vdc vdc ?10 % mw standard type 003 3 2.10 0.15 23 400 005 5 3.50 0.25 63 400 006 6 4.20 0.30 90 400 009 9 6.30 0.45 202 400 012 12 8.40 0.60 360 400 018 18 12.60 0.90 810 400 024 24 16.80 1.20 1440 400 048 48 33.60 2.40 5760 400 all fgures are given for coil without pre-energization, at ambient temperature +23c. miniature pcb relay pch ? co py righ t 20 09 by ty co el ectr oni cs ja pa n g.k. all ri gh ts re se rv ed. ed itio n: 1/ 20 10 rev.b ty co electron ic s ja pa n g. k. [3 -5 -8 , hisa mo to ta ka ts u- ku kawasa ki , 2 13- 85 35, ja pa n, te l: 81 44 84 4 8445] th is do cu me nt is su bj ect to ch an ge , pl eas e call lo ca l ty co elec tr on ics fo r th e la te st ve rs io n. reference da ta *abo ve re fe re nc e da ta is appl y fo r 1 fo rm c / no co ntac t si de , ra t ed vo lt ag e: 27 7v ac / co il po we r: 40 0m w. *ple as e co ntact with us ab ou t th e gr ap h of ex pe ct ed el ec tr ical li fe . ? co py righ t 20 09 by ty co el ectr oni cs ja pa n g.k. all ri gh ts re se rv ed. ed itio n: 1/ 20 10 rev.b ty co electron ic s ja pa n g. k. [3 -5 -8 , hisa mo to ta ka ts u- ku kawasa ki , 2 13- 85 35, ja pa n, te l: 81 44 84 4 8445] th is do cu me nt is su bj ect to ch an ge , pl eas e call lo ca l ty co elec tr on ics fo r th e la te st ve rs io n. reference da ta *abo ve re fe re nc e da ta is appl y fo r 1 fo rm c / no co ntac t si de , ra t ed vo lt ag e: 27 7v ac / co il po we r: 40 0m w. *ple as e co ntact with us ab ou t th e gr ap h of ex pe ct ed el ec tr ical li fe . z v f_pch_b oeg
04-2012, rev. 0412 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 2 general purpose relays pcb relays miniature pcb relay pch (continued) insulation data initial dielectric strength between open contacts 750v rms between contact and coil 4000v rms clearance/creepage between contact and coil no: 4.1mm / 6.3mm between contact and coil co: 3.1mm / 3.9mm tracking index of relay base standard type pti 175 wg txype pti 250 other data material compliance: eu rohs/elv, china rohs, reach, halogen content refer to the product compliance support center at www.te.com/customersupport/rohssupportcenter ambient temperature -40c to +85c category of environmental protection iec 61810 rtii - fux tight rtiii - wash tight shock resistance (functional) 10g shock resistance (destructive) 100g weight 7g resistance to soldering heat tht iec 60068-2-20 rtii: 270c/10s rtiii: 260c/5s packaging unit tray/100 pcs., carton box/1000 pcs. ? copyright 2009 by tyco electronics japan g.k. all rights reserved. edition: 1/2010 rev.b tyco electronics japan g.k. [3-5-8, hisamoto takatsu-ku kawasaki, 213-8535, jap an, tel: 81 44 844 8445] this document is subject to change, please call loc al tyco electronics for the latest version. ordering information for relays example part no. pch -1 12 d 2 m h ,000 1. basic series pch = compact pcb mount type 2. poles 1 = 1pole 3. coil voltage 05 = 5vdc 12= 12vdc 06 = 6vdc 24 = 24vdc 09 = 9vdc 48 = 48vdc* 4. coil power d = 400mw (1a,1c) l = 200mw (1a) 5. contact material 2 = agsno 2 6. contact arrangement blank = 1c m = 1a 7. enclosure blank = flux proof h = wash tight 8. suffix ,000 = standard model other suffix = custom model *coil voltage: 48vdc only can chose 400mw type. tolerance: 0.99mm max.: +/-0.1mm, 1-2.99mm: +/-0.2m m, 3mm min.: +/-0.3mm outline dimensions ( mm ) 1c* *1a outline dimensions is omitted. wiring diagram ( bottom view ) 1c 1a pc board layout (mm) (bottom view) 1c 1a terminal assignment bottom view on solder pins ? copyright 2009 by tyco electronics japan g.k. all rights reserved. edition: 1/2010 rev.b tyco electronics japan g.k. [3-5-8, hisamoto takatsu-ku kawasaki, 213-8535, jap an, tel: 81 44 844 8445] this document is subject to change, please call loc al tyco electronics for the latest version. ordering information for relays example part no. pch -1 12 d 2 m h ,000 1. basic series pch = compact pcb mount type 2. poles 1 = 1pole 3. coil voltage 05 = 5vdc 12= 12vdc 06 = 6vdc 24 = 24vdc 09 = 9vdc 48 = 48vdc* 4. coil power d = 400mw (1a,1c) l = 200mw (1a) 5. contact material 2 = agsno 2 6. contact arrangement blank = 1c m = 1a 7. enclosure blank = flux proof h = wash tight 8. suffix ,000 = standard model other suffix = custom model *coil voltage: 48vdc only can chose 400mw type. tolerance: 0.99mm max.: +/-0.1mm, 1-2.99mm: +/-0.2m m, 3mm min.: +/-0.3mm outline dimensions ( mm ) 1c* *1a outline dimensions is omitted. wiring diagram ( bottom view ) 1c 1a pc board layout (mm) (bottom view) 1c 1a dimensions ? copyright 2009 by tyco electronics japan g.k. all rights reserved. edition: 1/2010 rev.b tyco electronics japan g.k. [3-5-8, hisamoto takatsu-ku kawasaki, 213-8535, jap an, tel: 81 44 844 8445] this document is subject to change, please call loc al tyco electronics for the latest version. ordering information for relays example part no. pch -1 12 d 2 m h ,000 1. basic series pch = compact pcb mount type 2. poles 1 = 1pole 3. coil voltage 05 = 5vdc 12= 12vdc 06 = 6vdc 24 = 24vdc 09 = 9vdc 48 = 48vdc* 4. coil power d = 400mw (1a,1c) l = 200mw (1a) 5. contact material 2 = agsno 2 6. contact arrangement blank = 1c m = 1a 7. enclosure blank = flux proof h = wash tight 8. suffix ,000 = standard model other suffix = custom model *coil voltage: 48vdc only can chose 400mw type. tolerance: 0.99mm max.: +/-0.1mm, 1-2.99mm: +/-0.2m m, 3mm min.: +/-0.3mm outline dimensions ( mm ) 1c* *1a outline dimensions is omitted. wiring diagram ( bottom view ) 1c 1a pc board layout (mm) (bottom view) 1c 1a pcb layout bottom view on solder pins ? copyright 2009 by tyco electronics japan g.k. all rights reserved. edition: 1/2010 rev.b tyco electronics japan g.k. [3-5-8, hisamoto takatsu-ku kawasaki, 213-8535, jap an, tel: 81 44 844 8445] this document is subject to change, please call loc al tyco electronics for the latest version. ordering information for relays example part no. pch -1 12 d 2 m h ,000 1. basic series pch = compact pcb mount type 2. poles 1 = 1pole 3. coil voltage 05 = 5vdc 12= 12vdc 06 = 6vdc 24 = 24vdc 09 = 9vdc 48 = 48vdc* 4. coil power d = 400mw (1a,1c) l = 200mw (1a) 5. contact material 2 = agsno 2 6. contact arrangement blank = 1c m = 1a 7. enclosure blank = flux proof h = wash tight 8. suffix ,000 = standard model other suffix = custom model *coil voltage: 48vdc only can chose 400mw type. tolerance: 0.99mm max.: +/-0.1mm, 1-2.99mm: +/-0.2m m, 3mm min.: +/-0.3mm outline dimensions ( mm ) 1c* *1a outline dimensions is omitted. wiring diagram ( bottom view ) 1c 1a pc board layout (mm) (bottom view) 1c 1a 1 form c (co) 1 form a (no) 1 form c (co) 1 form a (no) oeg
04-2012, rev. 0412 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 3 general purpose relays pcb relays miniature pcb relay pch (continued) product code coil sensitivity cont.material arrangement enclosure insulation part number pch-105d2h,000 5vdc standard agsno 2 1 form c (co) wash tight class f 9-1440003-0 pch-105l2m,000 sensitive 1 form a (no) flux proof 1461352-2 pch-105l2mh,000 wash tight 1461353-2 pch-105l2m-wg flux proof cl. f, iec 60335-1 1721768-2 pch-106d2,000 6vdc standard 1 form c (co) class f 9-1440003-8 pch-109d2h,000 9vdc wash tight 9-1440003-2 pch-112d2,000 12vdc flux proof 1440004 pch-112d2h,000 wash tight 9-1440003-3 pch-112d2m,000 1 form a (no) flux proof 1461350-5 pch-112d2m-wg cl. f, iec 60335-1 1721767-5 pch-112d2-wg 1 form c (co) 1721766-5 pch-112l2m,000 sensitive 1 form a (no) class f 1461352-5 pch-112l2mh,000 wash tight 1461353-5 pch-112l2m-wg flux proof cl. f, iec 60335-1 1721768-5 pch-124d2,000 24vdc standard 1 form c (co) class f 1440004-1 pch-124d2h,000 wash tight 9-1440003-5 pch-124d2m,000 1 form a (no) flux proof 1461350-6 pch-124d2mh,000 wash tight 1461351-6 pch-124l2m,000 sensitive flux proof 1461352-6 pch-124l2mh,000 wash tight 1461353-6 pch-124l2m-wg flux proof cl. f, iec 60335-1 1721768-6 pch-148d2,000 48vdc standard 1 form c (co) class f 1461410-2 product code structure typical product code pch -1 12 d 2 h ,000 type pch miniature pcb relay pch number of poles 1 1 pole coil voltage coil code: please refer to coil versions table (e.g. 05=5vdc) coil sensitivity d standard 400mw l 200mw (for 1 form a contact only) contact material 2 agsno contact arrangement blank 1 form c (co) contact m 1 form a (no) contact category of protection blank flux proof, vented cover h wash tight, sealed plastic cover insulation system designation blank class f system wg class f system and for domestic appliances (iec 60335-1, 4 edition); suffx ,000 standard type other types on request oeg
|
